مبنى شركة كريسنت براس آند بين
يقع مبنى شركة كريسنت براس آند بين في 5766 شارع ترامبول في ديترويت ، ميشيغان . وقد أُدرج في السجل الوطني للأماكن التاريخية عام 2003. [ 1 ] ويُعرف حاليًا باسم " ريسرش لوفتس أون ترامبول" . [ 2 ]
تاريخ
في عام 1886، صمم ألفين دبليو نيدهام آلة لتصنيع مسامير علب السيجار. وقد استعان بدعم واستثمار جون وويليام غراي، وهما شقيقان كانا يديران شركة لصناعة العربات . [ 3 ]
أسس الرجال الثلاثة شركة إمباير واير نيل لتصنيع المسامير، وكان مقر عملهم في حظيرة جون غراي في ترومبول. في هذه الأثناء، اخترع نيدهام آلة أخرى لصنع دعامات المشعات (أجهزة صب تُستخدم لتثبيت القوالب في مكانها أثناء عملية الصب). وقد أثبتت الدعامات أنها تجارة أكثر ربحية من المسامير، فحوّلت الشركة إنتاجها تدريجيًا نحو هذا المجال. [ 3 ]
بقي مقر الشركة في حظيرة جون غراي حتى عام ١٨٩٧، حين انتقلت إلى المبنى الواقع في شارع آدامز والذي كان يضم مصنع عربات غراي. [ ٣ ] في الوقت نفسه، باع نيدهام حصته للأخوين غراي، وتغير اسم الشركة إلى شركة كريسنت للآلات. توسعت الشركة من هناك، وسرعان ما أصبح الأخوان غراي يعملان بدوام كامل في كريسنت. في عام ١٩٠٥، لم يعد مقر كريسنت في شارع آدامز يتسع لأعمالها، فبنت مبنى جديدًا في شارع ترومبول شمال ملكية جون غراي مباشرةً. [ ٣ ] بعد بضع سنوات، أُضيفت لوازم السباكة إلى قائمة منتجات الشركة، وغيرت اسمها إلى شركة كريسنت للنحاس والدبابيس. [ ٣ ]
أنتجت الشركة منتجات متعددة على مر تاريخها، مع أن المسامير والأساور ظلت تشكل الركيزة الأساسية لأعمالها. بقيت شركة كريسنت في موقعها في شارع ترومبول حتى عام ١٩٥٨، حين انتقلت، بسبب مشاكل عمالية، إلى أمريكوس، جورجيا ، وأعادت تنظيم نفسها تحت اسم سيمبلكس نيلز، إنك. [ ٣ ] ورغم عودة بعض عمليات التصنيع لاحقًا إلى مصنع ترومبول، إلا أن العمليات في ديترويت لم تتعافَ تمامًا، وتوقفت كريسنت عن التصنيع في ديترويت عام ١٩٨٤، وتبرعت بالمبنى لجمعية القديس فنسنت دي بول . [ ٣ ]
In September 2001, the building was purchased by 5766 Trumbull LLC with the intention of converting the former factory into affordable lofts. In spring 2005, construction began; a third floor was added to the original two-story structure and the entire building renovated into 35 loft spaces.[4] In October 2006, the first new resident moved into the renovated building. The building has been renamed Research Lofts on Trumbull.
Construction
The Detroit architectural firm of Rogers and MacFarlane designed the original building in 1905.[3] This building exemplifies the standard timber frame mill construction that was popular in Michigan well into the early 20th century. The large posts and beams created relatively large spaces free from interspersed columns and easily adaptable to large machinery. Massive posts and exposed floor joists were constructed to slow the spread of fire and aid in its detection by eliminating hidden spaces.
The building was enlarged in several stages, the first in 1916, then later in 1917, 1924, and the early 1950s.[2] These later additions were built using reinforced concrete, exemplifying the change in industrial architecture during the first part of the 20th century.
References
- 12"National Register Information System". National Register of Historic Places. National Park Service. April 15, 2008.
- 12Crescent Brass and Pin Company Building from Detroit1701.org
- 12345678Research LoftsArchived 2008-12-04 at the Wayback Machine History page
- ↑"Midtown Living"Archived 2008-07-04 at the Wayback Machine from Detroit Midtown, pp. 36-37
External links
- Research Lofts
- National Register of Historic Places in Detroit
- Industrial buildings completed in 1905
- Industrial buildings and structures on the National Register of Historic Places in Michigan
- Fastening tool manufacturers
- Tool manufacturing companies of the United States
- 1905 establishments in Michigan
- Industrial buildings and structures in Detroit
